P0900Wysoki
Błąd obwodu siłownika sprzęgła (otwarty obwód). Sterownik wykrył nieprawidłowy sygnał lub brak ciągłości w układzie elektrycznym siłownika sprzęgła.
Układ napędowy
Sprawdź szczegóły →P0910
WysokiGate Select Actuator circuit – open electrical circuit. The code indicates a fault in the gear selection actuator control system in an automated transmission.
OBD-II (EN): Gate Select Actuator Circuit Open
Code P0910 indicates a fault in the electrical circuit of the gear selection actuator in an automated transmission – most commonly caused by damaged wiring, a faulty actuator, or a clutch position sensor. The fault can cause problems with gear changes, transmission lockup in limp mode, or jerking while driving. Due to the system's complexity, diagnostics at a workshop equipped with a professional transmission scanner are recommended.
Symptoms
MIL (Check Engine) light or transmission warning on the dashboard; difficulty engaging or disengaging specific gears; transmission locked in one gear or entering limp mode; jerking during gear changes; in some cases, noticeable engine misfires caused by faulty synchronization of the clutch and gear selection.
Possible causes
• Damaged electrical wires or connectors in the gate select actuator circuit (corrosion, chafing, breakage) • Failure of the gate select actuator itself – mechanical or electrical wear • Faulty clutch position sensor • Worn or faulty clutch actuator • Mechanical damage to the gear control system – deviations in selection cables or pushrods • Internal mechanical damage to the transmission
Affected systems
skrzynia biegówukład sterowania skrzynią (TCU)siłownik wyboru bieguukład sprzęgłaelektronika napędowa
Related codes
Does code P0910 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.