Moduł sterowania nadwoziem (BCM) — usterka wewnętrzna
B0205
WysokiLow Beam Relay Circuit Fault. The body control module has detected an abnormality in the circuit of the relay responsible for turning on the front low beam headlights.
OBD-II (EN): Low Dipped Beam Relay Circuit Fault
Code B0205 signals a fault in the front low beam relay circuit – the vehicle may have trouble turning on or maintaining the headlights, directly affecting driving safety. The cause is most often a faulty relay, bad fuse, or problem with the electrical installation. Due to the impact on lighting and safety, prompt workshop diagnostics are recommended.
Symptoms
- Front low beam headlights do not turn on or work intermittently - Malfunction indicator light on the dashboard (MIL/BCM) - Possible complete loss of low beam headlights while driving - Flickering or irregular operation of front lights
Possible causes
- Faulty or blown low beam relay - Open or short circuit in the relay electrical circuit (wiring harness) - Damaged relay connector/plug (corrosion, loose contacts) - Body Control Module (BCM) failure – incorrect command controlling the relay - Blown fuse in the low beam circuit
Affected systems
Related codes
Zbyt niska prędkość tylnego silnika dmuchawy (wentylatora). Kod wskazuje na nieprawidłowe działanie układu klimatyzacji/ogrzewania tylnej strefy pojazdu.
Sources and further reading
Does code B0205 require professional diagnostics?
The code alone is not enough. To find the cause, you need to read live data, check freeze frame conditions, and compare with vehicle behavior. Book a diagnostic session.
